For more, see GeoSketch
Located: See below or PVA Settings
You can modify the file called FeatureCodes.csv
The following is information pertaining to how that file corresponds to settings when you go to draw a polygon in GeoSketch. If you are not sure where GeoSync is looking for the file you can check by opening GeoSync, selecting the project in which you draw sketches, click MODIFY, click PVA Settings, and look at the bottom where it says SKETCHCODESPATH. You can edit the FeatureCodes.csv file in either Excel or Notepad.
If opened in Notepad, the Feature Codes will look like the following:
GroundLiving,GL,1,0,1,0
LivingArea(1.5),(1.5 S),1.5,12,1,12
In the two examples above the values correspond to the following: Feature Name, Initial,
Multiplier, Line Color, Filltype, FillColor.
Change the values in the Sketch Codes file to customize the defaults when drawing in GeoSketch.
Use the following values to help customize the Feature Codes. Note: These values are the same as the values displayed in the Polygon Properties dialog.
Fill Types:
0 = Solid
1 = Transparent
2 = Horizontal
3 = Vertical Lines
4 = Upward Diagonal
5 = Downward Diagonal
6 = Cross
7 = Diagonal Cross
Colors:
0 = Black
1 = Dark Blue
2 = Dark Green
3 = Teal
4 = Dark Red
5 = Purple
6 = Olive Green
7 = Grey
8 = Dark Grey
9 = Blue
10 = Green
11 = Cyan
12 = Red
13 = Magenta
14 = Yellow
15 = White